Strautmann Verti-Mix SF - Settings of Charging Mode

Design and function
Verti-Mix SF / Verti-Mix Double SF Version 06.12
87
5.7.7.3 Settings of "Charging" mode
40
Maximum speed
Defines the possible maximum speed in percent.
41
Ramp time - Accelerate
Defines how fast the vehicle accelerates.
42
Ramp time - Reduce
Defines how fast the vehicle reduces its speed after the pedal has been released.
43
Pedal curve
Defines the pedal's sensitivity.
44
Automatic milling system ON / OFF
Defines the status of the automatic milling system.
45
Nominal milling pressure
Defines the nominal milling pressure.
46
Minimum lowering speed
Defines the minimum lowering speed of the cutter arm in percent.
47
Automatic milling system stop
No function.
50
Standard speed
Defines the standard speed in percent.
51
Reduced speed
Defines the reduced speed in percent.
52
Camera
Defines the standard camera for this operating mode.
53
Multi-function joystick - blue key
Defines the function of the blue key of the multi-function joystick in the selected
operating mode.
54
Multi-function joystick - green key
Defines the function of the green key of the multi-function joystick in the selected
operating mode.