Strautmann Verti-Mix SF - Spare and Wearing Parts, Auxiliary Materials; Warranty and Liability

Safety instructions
32
Verti-Mix SF / Verti-Mix Double SF Version 06.12
3.3.4 Spare and wearing parts, auxiliary materials
Immediately replace machine parts which are not in perfect condition.
Exclusively use original parts of the manufacturer or parts approved
by the manufacturer such that the operating license according to
national and international regulations will remain unaffected. If spare
and wearing parts produced by third-party manufacturers are used,
their stress-related and safety-conscious design and production will
not be ensured.
The manufacturer will not assume any liability for damage resulting
from the use of non-approved spare and wearing parts or auxiliary
materials.
3.3.5 Warranty and liability
As a basic principle, our "General Sales Terms and Delivery
Conditions" shall apply. They have been handed over to the user
upon conclusion of contract at the latest.
Any warranty and liability claims in case of personal injury and
material damage will be excluded if they are due to one or several of
the following reasons:
 improper use of the machine,
 improper assembly, commissioning, operation and maintenance
of the machine,
 operation of the machine, the safety devices being defective or
the safety and protective devices having not been properly
installed or being not serviceable,
 non-observance of the instructions included in the operating
instructions referring to commissioning, operation and
maintenance,
 unauthorized structural alterations on the machine,
 insufficient inspection of machine parts which are subject to
wear,
 improperly effected repairs,
 disasters due to foreign objects and force majeure.