Strautmann Verti-Mix SF - Steering System; Mixing Auger(S)

Design and function
Verti-Mix SF / Verti-Mix Double SF Version 06.12
79
5.7.6.9 Steering system
501
Front axle steering
Indicates whether the switching input is active.
502
Four-wheel steering
Indicates whether the switching input is active.
503
Combined steering (crab steering)
No function.
521
Position of rear axle
Indicates the percentage value by which the rear axle is turned in.
541
Preselection, four-wheel steering
Indicates whether the switching output is active.
542
Preselection, combined steering (crab steering)
No function.
543
Stop valve 1
Indicates whether the switching output is active.
544
Stop valve 2
Indicates whether the switching output is active.
5.7.6.10 Mixing auger(s)
301
Reduce mixing auger speed
Indicates whether the switching input is active.
302
Increase mixing auger speed
Indicates whether the switching input is active.
303
Mixing augers ON
Indicates whether the switching input is active.
311
Mixing auger frequency - normal mode
Indicates the mixing auger frequency.
312
Mixing auger frequency - quick motion mode
Indicates the mixing auger frequency.
331
Mixing motor
Indicates the electric current.
332
Mixing motor
Indicates the electric current.