Safety instructions
30
Verti-Mix SF / Verti-Mix Double SF Version 06.12
3.2.3 Qualification of staff
Only trained and instructed staff is allowed to operate the machine.
The user must clearly define the responsibilities of the members of
staff for operation, service and maintenance.
A person to be trained must be supervised when operating the
machine.
The user is only allowed to carry out the work described in these
operating instructions.
Only authorized workshops are allowed to carry out work on the
machine which requires special expert knowledge. Authorized
workshops have qualified staff and adequate means (tools, lifting and
supporting equipment) at their disposal to carry out this work properly.
This applies to any work:
which is not mentioned in these operating instructions,
which is marked with the annex "Shop work" in these operating
instructions.
Staff
Activity
Member of staff
especially
trained for the
activity
1)
Instructed
person
2)
Staff with professional
training (Authorized
workshop)
3)
Loading / Transport X X X
Commissioning -- X X
Setup -- X X
Operation -- X X
Service and maintenance -- X X
Trouble-shooting -- X X
Disposal X -- --
Legend: X..allowed --..not allowed
A person who is able to take on a particular task and is allowed
to carry it out for an adequately qualified company.
2)
A person is considered to be instructed if he or she has been
informed about the tasks assigned to him or her and possible
risks in case of improper behaviour and if he or she has been
instructed, if necessary, and if he or she has been advised of the
necessary protective devices and measures.
3)
Persons with professional training are considered to be qualified
(expert). Due to their professional training and the knowledge of
the relevant provisions, they are able to assess the tasks
assigned to them and to identify possible risks.
Please note: A qualification which is equivalent to professional
training may also be acquired by several years of practice in the
corresponding field of work.
To Next Page
