Strautmann Verti-Mix SF - Reverse Travel

Commissioning
136
Verti-Mix SF / Verti-Mix Double SF Version 06.12
6.6.2 Reverse travel
1. Switch the parking brake off.
2. Set the lever (1) of the reversing gear to
direction of motion position "Backwards" (2).
 The terminal displays the symbol "Direction
of motion Backwards"
. An acoustic
warning signal (optional extra) sounds and
the video surveillance monitor displays the
area behind the machine.
3. Check the hazardous area behind the
machine in the terminal.
4. Make sure that people / animals leave the
hazardous area if necessary.
5. Accelerate or decelerate the machine by
means of the pedal (3). The further the
pedal is pressed down, the higher the
travelling speed.
 Analog and digital display of the value for
the current travelling speed in the terminal.
Fig. 89