Safety instructions
44
Verti-Mix SF / Verti-Mix Double SF Version 06.12
Order number and explanation Warning signs
870 10 270
Please read and observe the operating and safety instructions before
commissioning!
870 07 120
Risks when carrying out work on the machine such as mounting, adjusting,
trouble-shooting and maintenance, due to accidental starting and rolling of
the machine!
This risk may cause most serious injuries or even death.
Secure the machine against accidental starting and rolling before carrying
out any work on the machine.
Read and observe the instructions in the respective chapters in the
operating instructions depending on the work to be carried out.
870 10 287
Dangerous situations may occur if load-bearing parts break due to
mechanical work on frame elements!
This risk may cause most serious injuries or even death.
As a basic principle,
mechanical processing of the chassis,
drilling at the chassis,
boring up of existing holes at the chassis frame or at load-bearing parts,
welding on load-bearing parts is not allowed.
870 07 108
Risk to any part of the body of being crushed due to necessary work
underneath unsecured, suspended loads or lifted machine parts!
This risk may cause most serious injuries or even death!
Activate the safety locking mechanism against accidental lowering of suspended
loads or lifted machine parts before entering the hazardous area.
870 07 108
To Next Page
