Stryker 4100 Series User Manual

2 www.stryker.com
EN 4100-005-700 Rev-AB
Contraindications
None known.
For Use With
The Stryker Cordless Driver and Universal Driver
Attachments are intended for use with the following
Stryker handpieces:
DESCRIPTION REF
System 8 Cordless Driver 4505-000-000
Cordless Driver 4 4405-000-000
Cordless Driver 3 4300-000-000
Cordless Driver 2 4200-000-000
Cordless Driver 4100-000-000
4101-000-000
CORE™ Universal Driver 5400-099-000
RemB
®
Electric Universal
Driver
6400-099-000
TPX
®
Universal Driver 7400-099-000
Safety Directives
WARNINGS:
• Before using this equipment, or any component
compatible with this equipment, read and
understand the instructions for use. Pay
particular attention to safety information.
Become familiar with the equipment before use.
• Only healthcare professionals trained and
experienced in the use of this medical device
should operate this equipment.
• The healthcare professional performing any
procedure is responsible for determining
the appropriateness of this equipment
and the specific technique used for each
patient. Stryker, as a manufacturer, does not
recommend surgical procedure or technique.
• ALWAYS slide the function switch to the safe
mode position when the handpiece is idle,
before installing an attachment or accessory, or
when passing the handpiece to another person.
• Upon initial receipt and before each use, clean
and sterilize the equipment as indicated. See
the care instructions manual supplied with the
handpiece. Upon initial receipt and before each
use, inspect each component for damage. DO
NOT use any equipment if damage is apparent.
• Use only Stryker-approved equipment, unless
otherwise specified. DO NOT modify any
equipment without the authorization of the
manufacturer.
• ALWAYS operate the equipment within the
specified environmental condition values. See
the Specifications section.
• When used with handpieces, the attachments
described in this manual are applied parts. For
more information, see the instructions for use
supplied with the handpiece.
• DO NOT reuse, reprocess, or repackage a
device that is intended for single use only.
Failure to comply may lead to infection or
cross-infection and result in patient and/or
healthcare staff injury.
Sagittal Saw Attachment
Description
Sagittal Saw Attachment (REF 4100-400-000)
Length: 112.0 mm; Diameter: 22.5 mm; Weight:
172.0 g
Accessories
NOTE: For a complete list of accessories, contact
your Stryker sales representative. Outside the US,
contact your nearest Stryker subsidiary.
The following Stryker-approved accessories are
sold separately:
DESCRIPTION REF
Blades 2296-003-XXX Series
2296-023-XXX Series
2296-033-XXX Series
5400-003-XXX Series
5400-134-XXX Series

Stryker 4100 Series Specifications

General

Brand	Stryker
Model	4100 Series
Category	Tools
Language	English