Stryker Bertec FL13E Series - Technical Specifications

PREPARATION PRIOR TO USE
1 - 6 STRYKER MEDICAL/BERTEC MEDICAL
Technical Specifications
RECOMMENDED USE
This bed is designed for use in hospitals and residential and extended care
centres.
It is recommended in general health care use.
DANGER
Use of electric hospital beds by patients in psychiatric wards
should be avoided.
MODEL IDENTIFICATION
DESCRIPTION OF MATERIAL
MODEL FL13E78 FL13E78OB FL13E80 FL13E84
Nominal Length 78" 78" 80" 84"
Commands Electric Electric Electric Electric
SLEEPING SURFACE
Minimum height 39.0 cm (15 3/8") 39.0 cm (15 3/8") 39.0 cm (15 3/8") 39.0 cm (15 3/8")
Maximum height 76.8 cm (30 1/4") 76.8 cm (30 1/4") 76.8 cm (30 1/4") 76.8 cm (30 1/4")
Width 91.4 cm (36") 137.2 cm (54") 91.4 cm (36") 91.4 cm (36")
Length 199.4 cm (78 1/2") 199.4 cm (78 1/2") 203.2 cm (80") 213.4 cm (84")
OVERALL BED SIZE
Length* 222.3 cm (87 1/2") 222.3 cm (87 1/2") 226.0 cm (89") 236.2 cm (93")
Width* 94.1 cm (37 1/16") 140.3 cm (55 1/4") 94.1 cm (37 1/16") 94.1 cm (37 1/16")
Activation 3 motors 3 motors 3 motors 3 motors
Load Capacity 249.5 kg (550 lb.) 249.5 kg (550 lb.) 249.5 kg (550 lb.) 249.5 kg (550 lb.)
ANGLE
Thigh section 30° 30° 30° 30°
Head section 60° 60° 60° 60°
Trendelenburg 14° 14° 14° 14°
Reverse Trendelenburg 14° 14° 14° 14°
Total Weight* 189 kg (420 lb.) 247 kg (545 lb.) 192 kg (425 lb.) 194 kg (430 lb.)
* Measured with half-length safety side-rails on model FL13E78OB and full-length safety side-rails on all other models.
FL13E__-____
FL13E78OB-____
54" enlarged bedLength of sleeping surface
78"
,
80"
,
84"
Options group