STRYKER MEDICAL/BERTEC MÉDICAL 2 - 9
USER GUIDE
FULL-LENGTH SAFETY SIDE-RAILS
A locking system securely maintains half-length safety side-rails in the high
position. A lever placed at the centre of the bed frame (under the sleeping
surface) releases side-rail.
TO LOWER A SIDE-RAIL
1. Grasp the upper rail of the side-rail at its centre.
2. Use your other hand to pull the latch level. Lift side-rail slightly to
release latching mechanism.
3. Pivot side-rail until it reaches its low position. Side-rail will
automatically retract to storage position under sleeping surface.
TO RAISE A SIDE-RAIL TO THE HIGH POSITION
■ Grasp the upper rail of the side-rail at its centre and lift until it locks
into position.
DANGER
Make sure that side-rail is locked in raised position at both
ends of bed.
■ To ensure that side-rail is locked in position, push on the side-rail at
the head end of bed and then at the foot end.
Never hit sides of bed on walls or furniture, particularly
during transportation.
Wall bumpers located at the head of the bed will not prevent
damage to side-rails caused by blows to side of bed.
Options
3
To Next Page
Loading...
