EasyManua.ls Logo

Stryker Bertec FL13E Series - Removal and Replacement of Headboard and Footboard

Stryker Bertec FL13E Series
67 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
STRYKER MEDICAL/BERTEC MÉDICAL 2 - 7
USER GUIDE
Removal of Headboard and Footboard
TO REMOVE BOARDS
Lift boards to remove their braces from bed uprights.
TO REPLACE BOARDS
Headboard
The headboard brace must face the outside of the bed (A).
Footboard
The footboard brace must face the inside of the bed (B).
PERMANENT INSTALLATION
If required, permanently install boards by inserting a #8 x 3/8"
metal screw in the hole located on the side of the bed upright.
The screw must be taken out to remove board at a later date.
Do not permanently install boards on a bed used by a pa-
tient requiring resuscitation or any other emergency
treatment.
A
B

Related product manuals