Stryker Bertec FL13E Series - Page 12

PREPARATION PRIOR TO USE
1 - 8 STRYKER MEDICAL/BERTEC MEDICAL
STANDARD EQUIPMENT, OPTIONS ET ACCESSORIES
STANDARD EQUIPMENT Quantity
Wall bumpers at head of bed 2
Lateral mattress restraints 4
Foot end mattress restraint 1
Drainage bag hooks 2 or 4
Openings for restraint belts 6
Anchor for trapeze mounting 1
Trendelenburg position clutch lever 1
Anchor sockets for traction system 4
I.V. rod sockets 6
Safety nets (full-length safety side-rails) 2
OPTIONS
Half-length safety side-rails
Full-length safety side-rails
Nursing control centre
Patient controls
Contour positioning
Nurse call
Connector for call cord
Instant CPR release
Central locking system
Immobilizer legs
Telescopic bumpers
ACCESSORIES
I.V. rods
Emergency crank handle
Trapeze mounting
Technical Specifications
HEAD SECTION
ELEVATION
THIGH SECTION
ELEVATION
CONTOUR
POSITIONING
(OPTIONAL)
REVERSE TRENDELENBURG
POSITION
TRENDELENBURG POSITION
VASCULAR POSITION
CARDIAC CHAIR POSITION
BED POSITIONS