USER GUIDE
2 - 16 STRYKER MEDICAL/BERTEC MÉDICAL
2. Place nylon washer on fixed section and insert movable section into
fixed section by pulling on horizontal plunger blocking part in place.
Accessories
2
PIVOT ADJUSTMENT
The vertical plunger located on mounting locks it in place.
■ Pull on plunger and pivot mounting until plunger blocks movement.
TRAPEZE HEIGHT ADJUSTMENT
Adjust trapeze height by lengthening or shortening its strap.
Make sure trapeze straps are secure before completing
adjustment.
CAUTION
Do not exert more than 175 lb. of traction on trapeze.
Do not use trapeze as a patient lift.
The trapeze may be stored to the side between uses.
To Next Page
Loading...
