Stryker Power-LOAD 6390 - Page 44

A
B
C
FFiigguurree 1155 –– MMaannuuaall rreelleeaassee bbuuttttoonn aasssseemmbbllyy
7. Unplug the cables from the master On/Off switch (D) and remove the manual release button assembly (Figure 16).
NNoottee -- Make note of the cable connection locations, so they do not get mixed up.
D
FFiigguurree 1166 –– OOnn//OOffff sswwiittcchh ccaabbllee llooccaattiioonnss
8. Reverse steps to reinstall.
9. Verify proper operation before you return the product to service.
EN 38 6390-309-002 Rev AB.0