ME(H4SO)-77
MECHANICAL
Cylinder Block
Fluid packing:
Part No. 004403007
THREE BOND 1215 or equivalent
(6) Install the service hole plug and gasket.
NOTE:
Use a new gasket.
(7) Turn the cylinder block to face the #3 and #4
piston side upward. Using the same procedures
as used for #1 and #2 cylinders, install the pis-
tons and piston pins.
ME-00160
ME-00140
(1) Piston (5) Service hole plug Tightening torque: N·m (kgf-m, ft-lb)
(2) Piston pin (6) Service hole cover T1: 6.4 (0.65, 4.7)
(3) Circlip (7) O-ring T2: 70 (7.1, 51.4)
(4) Gasket
(1)
(2)
(3)
(1)
(2)
(6)
(3)
(7)
(4)
(5)
ME-00161
T2
T1
To Next Page
