FU(H4SO)-20
FUEL INJECTION (FUEL SYSTEMS)
Intake Manifold
9) Install the air cleaner case stay RH and engine
harness bracket, and connect the engine harness
connectors to bulkhead connectors.
10) Connect the brake booster hose.
11) Connect the engine coolant hose (A) to throttle
body.
12) Connect the PCV hose to intake manifold.
13) Connect the spark plug cords to spark plugs.
14) Install the power steering pump and reservoir
tank to bracket.
(1) Install the reservoir tank to bracket.
(2) Connect the connector to the power steering
pump switch.
(3) Tighten the bolts which install the power
steering pump bracket.
Tightening torque:
22 N·m (2.2 kgf-m, 15.9 ft-lb)
(4) Install the power steering pipes onto the
right side intake manifold protector RH.
FU-00258
FU-00958
FU-00361
(A)
(A)
FU-00141
FU-00020
FU-00878
FU-00139
FU-00877
To Next Page
Loading...
