FU(H4SO)-41
FUEL INJECTION (FUEL SYSTEMS)
Fuel Injector
• 1.6 L MODEL
• 2.0 L MODEL
14) Remove the fuel injector from intake manifold.
(1) Remove the fuel injector securing clip.
(2) Remove the fuel injector while lifting up the
fuel injector pipe.
B: INSTALLATION
1. RH SIDE
Install in the reverse order of removal.
NOTE:
Replace O-rings with new ones.
Tightening torque:
6.4 N·m (0.65 kgf-m, 4.7 ft-lb)
Tightening torque:
19 N·m (1.9 kgf-m, 13.7 ft-lb)
FU-00962
FU-00170
FU-00312
FU-00313
(A) O-ring
(B) Fuel injector
FU-01112
(A)
(A)
(A)
(B)
FU-00314
FU-00284