3-1
Cleaning
To keep excellent splice quality, regular cleaning and inspection are required.
Especially cleaning should be performed before and after each use. We recommend
your splicer to be checked through our maintenance service once a year.
Clean each part with a cotton swab. Please bear in mind that daily cleaning can
maintain splicer performance. Clean components before and after use.
Names of components
V-groove
Electrode for
high voltage
side
Electrode
cover plate
thumb-screw
& electrode
cover plate
Lens protection
glass
Electrode cover
plate
thumb-screw &
electrode cover
plate
V-groove
illumination
Lens protection
glass
3. Daily cleaning and checking up
Turn off the TYPE-71C before maintenance work. Failure to do
so may cause electric shock.
Warning
Bare fiber pad
LED
To Next Page
Loading...