3-7
• Be sure to turn off the splicer and unplug the power cord or
remove the battery pack before replacing the electrodes.
• Discard the old electrodes properly.
Caution
• Do not clean the electrode. Doing so may cause unstable arcing
performance.
Caution
An electrode tip is extremely
sharp. Handle with care.
Caution
Protrusion
Please confirm the plastic button of the
electrode is certainly pushed by the
protrusion.
Caution
Plastic button
<Correct example>
<Wrong example>
Splice performance is not
steady or the part of splicer is
damaged when installing the
electrode at a wrong position.
Caution
To Next Page
Loading...