S One User’s Manual
Setup 1-4
Warning label regarding the fuse. For continued
protection against fire hazard, only replace with fuses of
the same type and rating.
Double pole/neutral fusing.
This label is stuck near the power inlet, on the rear.
Caution: Always leave the pinch rollers in the upper
position when the cutter is not in use.
This label is stuck on the right-side plate.
The S One cutters use razor-sharp knives. Touching the
knife with bare hands may cause injury.
Hazardous moving part. Keep your fingers and other
body parts away from this area.
This label is stuck on the cutting head.
ATTENTION:
Risk of electric shock. Do not open.
Double pole / neutral fusing.
For continued protection against risk of fire,
replace only with same type and rating of fuse.
CAUTION:
Risque de choc électrique. Ne pas ouvrir.
Double pôle / fusible sur le neutre.
Pour ne pas compromettre la protection
contre les risques d’incendie, remplacer
par un fusible de même type et de mêmes
caractéristiques nominales.
1.1.5 Warning labels on the machine
To Next Page
Loading...
