Summa S ONE - Printing the Graphic; Margins When Printing on a Roll; Margins When Printing on a Sheet

S One User’s Manual
OPOS 3-2
Print the graphic and its marks. When printing on a roll, leave a margin of 2 cm (0.8 in) at the
sides and at the front. For shorter jobs the edge margins may be smaller, but they must be at
least 1 cm (0.4 in).
FIG 3-1
3-1 MARGINS WHEN PRINTING ON A ROLL
Leave a minimum of 40 mm at the end of a roll. When printing on a sheet, leave a margin of at
least 40 mm between the last OPOS mark and the media edge (this is also the minimum amount
of material that should be left at the end of a roll).
FIG 3-2
3-2 MARGINS WHEN PRINTING ON A SHEET
3.2.1 Printing the graphic