Summa S ONE - Performance; Interface

S One User’s Manual
Specifications 6-6
Cutting specifications on 0.05 mm (0.002") vinyl with waxed backing, total media thickness not
exceeding 0.25 mm (0.010").
Axial speed
50 to 800 mm/s
2 to 32 ips
Maximum Speed
Up to 1131 mm/s diagonal
Up to 44 ips diagonal
Default speed
700 mm/s
28 ips
Axial Acceleration
2 G
Max. Acceleration
up to 3 G diagonal
Addressable resolution
0.025 mm, 0.1 mm
0.001", 0.005"
Default resolution
0.025 mm
0.001"
Mechanical resolution
0.0127 mm
0.0005"
Repeatability
(1)
+/- 0.1mm
+/- 0.004”
Accuracy*
0.2% of move or 0.25 mm,
whichever is greater
(2)
0.2% of move or 0.010",
whichever is greater
(2)
Knife pressure
0 to 600 gr.
(3)
Pen pressure
0 to 600 gr.
(3)
(1)
Valid within the guaranteed tracking length (see 6.2.3 Media handling). Not valid in ‘Oversized’ Mode.
(2)
Excludes differences due to media expansion, stretching, etc.
(3)
Except for S1D140FX which is 400 gr.
*Typical values, may vary depending on cutting job and material.
Communication
Ethernet
I/O Port connector
RJ45 female connector
WIFI
(1)
802.11 b/g/n
Network security
• WEP
• WPA/WPA2 Personal
USB
I/O Port connector
USB series “B” receptacle (female plug)
Mating connector
USB series “B” plug (male plug)
Version
1.1
Buffer Size
10 MB
(1)
Not available on S One D140FX
6.2.4 Performance
6.2.5 Interface