SummaSign series Cutters Service Manual
ONLINE 1
Menu
800mm/s 120g K
USER CO NFIG 1
I N TERN A L TESTS
SUMMASIGN SERIES CONFIGURATION SUBMENUS
To select a menu by scrolling through the different options, press the jogging key .
To exit from the menus and resume the previous on line operation, press the
key
(ON LINE).
Under normal conditions, the cutter is on line; it may then be selected by the host
computer for a cutting or plotting operation or deselected by the host computer.
Pressing the
, or key will make the cutter go off line, in order to initiate
another operation.
1-4 Keyboardcontrols
To Next Page
Loading...
