SummaSignT-sesiceUser’s Ma
CLEANING THE NOSE PIECE
CLEANIN
The nose piece may become dirty with accumulated residue from the vinyl and will
result in poor cut quality.
To clean the nose piece, proceed as follows:
1. Gently take out the knife or ball-point pen by turning the knife holder anticlockwise.
2. Observe the orientation of the nose piece first and then push it out of its holder.
3. Remove any remaining vinyl residue using a brush or a pair of tweezers.
4. Place the nose piece back .
5. Install the knife or ball-point pen holder as described in section 1.7.
3-4 Maintenance and Cleaning
To Next Page
Loading...
