Summa SummaSign D1010 - Maintenance and Cleaning

Maintenance and Cleaning 3-1
SECTION 3
MAINTENANCE
The SummaSign cutter range has a number of sliding surfaces made of smooth metals
and plastics. They are virtually friction-free and require no lubrication. They will,
however, collect dust and lint which may affect the performance of the cutter. Keep the
cutter as clean as possible by using a dust cover. When necessary, clean the unit with
a soft cloth dampened with isopropyl alcohol or mild detergent. Do not use abrasives.
Maintenance and Cleaning 3-1