SummaSign Service Manual
2-16 Replacements Guidelines
2a connector paper sensors 4 connector keyboard
2b connector cam switch 5 connector LCD screen
2c connector y-encoder 6 place for safeguard
2d connector x-encoder 7 grounding clamps
2e connector main power 8a completely unscrew this one
2f connector y-motor 8b just loosen this one a bit
2g connector x-motor with encoder 9 vertically aligned screws
2h connector x-motor without (*) 10 fan motor connector
3 connector flatcable
(*) on the older models on seperate pcb
To Next Page
Loading...
