38
3 Keep slings that are connected to the cabinet in the groove of the limit wooden blocks
during the hoisting to prevent them from swinging and scratching the cabinet.
4 The whole machine can only be hoisted if it is balanced. Hoist the machine slowly.
Pay attention to the balance and do not move too fast.
5 When the PCS is hoisted in place, remove the protective materials around the cabi-
net and the limit wooden blocks on the upper part to ensure the normal use of the
product.
The product shown this chapter is the version with a rain cover.
Be sure to install all the base covers of the PCS before booting the device.
Take the dimensions of the PCS and other devices into account when designing
the door of the control room for convenient transport of the PCS.
Hoisting with flexible slings!
The hoisting beam of the equipment is included in the delivery accessories. If the
customer provides hoisting tools, please contact SUNGROW in advance.
The flexible slings are included in the accessories shipped with the container.
Hoist the auxiliary hoisting beam on the top after tightening the screws!
The auxiliary hoisting beam on the top of the equipment is included in the delivery
accessories. If the customer provides hoisting tools, please contact SUNGROW in
advance.
5.6 Field Installation
• Do not perform any mechanical operations that are not related to the PCS in-
stallation inside the PCS or on top of the PCS.
• During installation, keep the inside of the PCS and surrounding environment
clean.
5 Mechanical Mounting User Manual
To Next Page
Loading...
Need help?
General
