Sungrow SG110CX - Page 100

User Manual 7 iSolarCloud App
Parameter
Definition/Setting Descrip
tion
Range
Reactive power setting
persistence
Switch for enabling/disabling
the power-off function during re
active power.
Enable/Disable
Reactive power regula
tion mode
— Off/PF/Qt/Q(P)/Q(U)
Reactive power regula
tion
Switch for enabling/disabling
reactive response function.
Enable/Disable
Reactive power regula
tion time
Ends time of reactive response. 0.1s~600.0s
Q(P)Curve Select corresponding curve ac
cording to local regulations
Curve A/Curve B/Curve C*
QP_P1 Output power at P1 on the Q(P)
mode curve (in percentage)
10.0%~100.0%
QP_P2 Output power at P2 on the Q(P)
mode curve (in percentage)
20.0%~100.0%
QP_P3 Output power at P3 on the Q(P)
mode curve (in percentage)
20.0%~100.0%
QP_K1 Power factor at P1 on the Q(P)
mode curve
Curve A/Curve
C:0.800~1.000
Curve B: [-0.600~0.600]*Ac
tive Overload Rate/1000
QP_K2 Power factor at P2 on the Q(P)
mode curve
Curve A/Curve C:
0.800~1.000
Curve B: [-0.600~0.600]*Ac
tive Overload Rate/1000
QP_K3 Power factor at P3 on the Q(P)
mode curve
Curve A/Curve C:
0.800~1.000
Curve B: [-0.600~0.600]*Ac
tive Overload Rate/1000
QP_EnterVoltage Voltage percentage for Q(P)
function activation
100.0%~110.0%
QP_ExitVoltage Voltage percentage for Q(P)
function deactivation
90.0%~100.0%
QP_EXitPower Power percentage for Q(P)
function deactivation
1.0%-20.0%
QP_EnableMode Unconditional activation/deacti
vation of Q(P) function
Yes/No
91