16
4.3 Installation Tools
Installation tools include but are not limited to the following recommended ones. If
necessary, use other auxiliary tools on site.
Table 4-1 Tool specification
Goggles
Earplugs Dust mask Protective gloves
Insulated shoes
Utility knife
Marker Wrist strap
Wire cutter Wire stripper Hydraulic plier Rubber mallet
Hammer drill
(φ10)
Phillips screwdriver
(M3, M4, M6)
Electric screwdriver
(M3, M4, M6)
Wrench (30 mm,
35 mm, 46 mm)
Heat gun
MC4 terminal
crimping tool (4
mm
2
–6 mm
2
)
MC4 terminal
wrench
Multimeter (≥
1100 Vdc)
4 Mechanical Mounting User Manual
To Next Page
Loading...
