64
NNoo.. NNaammee
DDeessccrriippttiioonn
6
Total yield Shows accumulative power generation of the inverter
7
Navigation bar
Includes menus of "Home", "Run Infomation", "Records"
and "More".
If the inverter runs abnormally, the fault icon
will appear on the upper left corner of
the screen. Users can tap the icon to view detailed fault information and corrective
measures.
7.7 Run Information
Tap RRuunn IInnffoorrmmaattiioonn on the navigation bar to enter the screen showing running
information, slide the screen upwards to view all detailed information.
Table 7-5 Description of Run Information
IItteemm
DDeessccrriippttiioonn
PV information
Shows voltage and current of every PV string.
Inverter
information
Shows basic information such as running state, on-grid running
time, negative voltage to grid, bus voltage, internal air
temperature, inverter efficiency, etc.
Input
Shows total DC power, voltage and current of MPPT1 and
MPPT2.
Output
Shows daily/monthly/annual/total yield, total active/reactive/
apparent power, total power factor, grid frequency, phase
voltage and current.
Meter information
Shows active power and phase active power of the meter.
7.8 Records
Tap RReeccoorrddss on the navigation bar to enter the screen showing event records, as
shown in the following figure.
7 iSolarCloud App User Manual
To Next Page
Loading...
