56
FFiigguurree 77--22 WLAN Local Access
Step 5 If the inverter is not initialized, navigate to the quick setting screen to initialize the
protection parameters. For details, please refer to ""IInniittiiaall SSeettttiinnggss"".
The "Country/region" must be set to the country where the inverter is installed.
Otherwise, the inverter may report errors.
Step 6 After finishing the settings, tap TTUUNNRR OONN DDEEVVIICCEE at the upper right corner and the
device will be initialized. The App will send start instructions and the device will start and
operate.
Step 7 After initialization settings, the App will return automatically to the home page.
-- -- EEnndd
7.4 Initial Settings
Tap CCoouunnttrryy//rreeggiioonn and select the country where the inverter is installed. For countries
except Australia and Germany, the initialization is completed.
7 iSolarCloud App User Manual
To Next Page
Loading...
