74
Step 8 Install the MC4 waterproof plugs.
For further disconnection and reconnection instructions, please visit the
webpage of respective component manufacturer.
-- -- EEnndd
8.2 Dismantling the Inverter
Risk of burn injuries and electric shock!
Do not touch any inner live parts until for at least 10 minutes after disconnecting
the inverter from the utility grid and the PV input.
Step 1 Refer to "5 Electrical Connection" for the inverter disconnection of all cables in reverse
steps.
Step 2 Dismantle the inverter referring to "4 Mechanical Mounting" in reverse steps.
Step 3 If necessary, remove the wall-mounting bracket from the wall.
Step 4 If the inverter will be reinstalled in the future, please refer to "3.2 Inverter Storage" for a
proper conservation.
-- -- EEnndd
8.3 Disposal of the Inverter
Users take the responsibility for the disposal of the inverter.
Some parts and devices of the inverter, such as the capacitors, may cause
environmental pollution.
Do not dispose of the product together with household waste but in accordance
with the disposal regulations for electronic waste applicable at the installation
site.
8 System Decommissioning User Manual
To Next Page
Loading...
