69
FFiigguurree 77--1155 PID Setting
Table 7-7 PID Parameter Description
PPaarraammeetteerr
DDeessccrriippttiioonn
PID Recovery
Set enabling/disabling of the PID night recovery function. PID
night recovery functions between 22:00 pm and 5:00 am by
default.
Clear PID alarm
If ISO impedance abnormality or PID function exception is
detected during running of the PID function, the inverter reports
a PID false alarm and reminds the user to take corresponding
measures. After processing, clear the alarm via this parameter.
PID Scheme
Apply negative or positive voltage.
After the PID night recovery function is enabled, the fault indicator on the
inverter front panel turns green.
7.9.3 Power Regulation Parameters
AAccttiivvee PPoowweerr RReegguullaattiioonn
Tap SSeettttiinnggss→→PPoowweerr RReegguullaattiioonn PPaarraammeetteerrss→→AAccttiivvee PPoowweerr RReegguullaattiioonn to enter
the screen, as shown in the following figure.
User Manual 7 iSolarCloud App
To Next Page
Loading...
