27
-- -- EEnndd
5.5.3 Installing the AC Connector (< 15 kW)
High voltage may be present in inverter!
Ensure all cables are voltage-free before electrical connection.
Do not connect the AC circuit breaker until all inverter electrical connections are
completed.
Step 1 Disconnect the AC circuit breaker and secure it against reconnection.
Step 2 Remove the waterproof lid from the AACC terminal.
Step 3 Lift the locking part upwards and insert the AC connector into the AACC terminal on the
bottom of the inverter. Then press the locking part and secure it with the screw.
User Manual 5 Electrical Connection
To Next Page
Loading...
