4 Unpacking and Storing User Manual
24
Icon Description
TUV mark of conformity.
CE mark of conformity.
4.4 Storing the Inverter
If you do not install the inverter immediately, choose an appropriate location to
store it. Instructions for storage are:
y
The device must be stored in the original packaging.
y
The storage temperature should be always between -30°C and +85°C, and the
storage relative humidity should be always between 0 and 100 %.
The following figure shows the storage of the inverter.
Fig. 4-4 Example of Inverter Storage
The packaging should be upright.
If there is more than one inverter to be stored, the maximum stacked layers
are 5.
To Next Page
Loading...
