Sungrow SH5K - Advanced Settings

10 Appendix I: LCD Operation User Manual
80
When the DRM state is DRM0, the “ON” option will be
disabled.
10.7 Advanced Settings
10.7.1 Inputting Password
The parameter settings are protected with a password. If you want to set the
inverter’s parameters, you have to input the correct password.
Main Screen (Press ENT)→Menu (Press ×2)→Settings (Press ENT)
Press and Press ENT to input the password 111.
Press ENT to confirm the password and enter the
submenu.
10.7.2 Setting Reactive Power Regulation
Main Screen (Press ENT)→Menu (Press ×2)→Settings (Press ENT)→Input
password 111 (Press ENT)→Reactive Power (Press ENT)
For the modes Qt, Q(p) and Q(u), see “12.2 Reactive
Power Regulation”.