26
(3) Method of Use: Start B/T Button
This button is used when the user wants to prevent threads from loosening at the end of the sewing work. If the user presses this button
in sequence, the location on the lights will change. This button offers the following three functions.
Using the A, B buttons in the 4-digit displayer, the user can program the B/T number of stitches he/she wants.
When sewing starts, B/T
sewing does not operate.
When sewing starts, B/T
sewing is operated with
the
button.
When sewing starts, B/T
sewing is operated with
the
button.
(4) Method of use: End B/T Button
This button is used when the user wants to prevent threads from loosening at the end of the sewing work. If the user presses this button
in sequence, the location on the lights will change. This button offers the following three functions.
Using the C, D buttons in the 4-digit displayer, the user can program the B/T number of stitches he wants.
When sewing ends, B/T
sewing does not operate.
When sewing ends, B/T
sewing can be operated
with the
button.
When sewing ends, B/T
sewing can be operated
with the
button.
(5) Method of Use: The Needle Plate Position Selection Button When the Sewing Machine Stops
When the user turns the power on, one of the up stop or down stop lights in the program unit panel needle plate is always left on. The
user can change the stop location by pressing the button.
When machine stops while sewing, the
needle plate makes an up stop.
When machine stops while sewing, the
needle plate makes a down stop.
Caution
Be aware that if the start B/T stitch is set to '0' in the 4-digit displayer, the start B/T sewing is impossible.
Caution
Be aware that if the end B/T stitch is set to '0' in the 4-digit displayer, the start B/T sewing is impossible.
To Next Page
Loading...
Need help?
General
