155
1. Select “Open Bin File” in the menu.
2. The following “Open Dialog”is displayed.
3. Select “Bm10.bin”to the directory where the files is saved, and click “Open”.
Then you can confirm “Bm10.bin”to “File Name”in the Dialog.
Here the user may write on those files containing actual extension patterns
as was mentioned earlier in regard to Pattern/Bartack. It must be kept in
mind that no writing should be done on the
brtk.bin file since it contains th
information on extension patterns only.
③ If Blank Check is successfully executed, open BIN files to save them to the buffer in
preparation for recording data to the ROM.
④ Check if the opened file has been saved to the buffer.
Click “Edit Buffer” among the function keys. If the data is normally recorded, the
following screen is displayed.
To see data content in detail, press the keyboard’s direction keys up
and down, then you can confirm that the data saved in the program
buffer is passing over page by page.
Note
To Next Page
Loading...
