Supero SMT IPMI - Appendix C RADIUS Setup Guidelines; Configure User Information

Appendix C: Radius Setup Guidelines
C-1
Appendix C
RADIUS Setup Guidelines
This chapter provides the Radius setup guidelines for IPMI rmware.
1. Start VM with RHEL4.7.VMX and boot into the OS.
2. Check the IP address of the RADIUS server.
3. Congure User information.
# vi /etc/raddb/users
•H=4, I =4 Administrator (Super)
•H=3, I =3 Operator (Randy)
•H=2, I =2 User (Tester)
•H=1, I =1 No Access