Supero SMT IPMI User Manual

SMT IPMI User's Guide
A-4
Figure 10: Flash Tools Dumping the Firmware
In the Windows/Linux version of the Flash Tools Utility, there are six parameters:
(1) –f: Type <-f> to enter the lename of the rmware that you want to update.
(2) –i: -i indicates the IPMI channel. Currently, KCS and LAN connections are
supported. If a LAN connection is used, the user needs to enter the following pa-
rameters:
Figure11MainScreenofFlashTools(intheWindows/LinuxVersion)
A-4 Windows/LinuxVersionofFlashTools
In addition to DOS, Aten's Flash Tools Utility supports Windows and Linux plat-
forms.
The Windows/Linux version of Flash Tools Utility provides the same features sup-
ported by the DOS version. In addition, it also allows the user to update the rmware
via LAN connections.
The main screen of the Windows/Linux version displays the information about the
rmware and the instructions on how to use the utility as shown in Figure 11.

Supero SMT IPMI Specifications

General

Brand	Supero
Model	SMT IPMI
Category	Controller
Language	English