Supero SMT IPMI User Manual

Chapter 2: Conguring BMC/IPMI Settings
2-29
2.8.10ConguringtheSMTPSettings
This feature allows the user to congure SMTP (Simple Mail Transfer Protocol)
settings for email transmission through the network. When you click the <SMTP>
icon in the Options window, the following screen will display.
To congure SMTP settings, follow the instructions below.
1. Check the box to enable SMTP SSL Authentication support. Once SMTP SSL
Authentication is enabled, enter information in the elds below.
Note: SHA2 and RSA 2048 bit SSL supported.
2. Enter the IP address for the SMTP (Simple Mail Transfer Protocol) Mail
server. The SMTP port number will be displayed.
3. Enter the user name for your SMTP Mail server. (Optional)
4. Enter the user password for your SMTP Mail server. (Optional) The status of
the sender's address will be displayed.
After entering the information above, click <Save> to save the settings.
4
1
2
3

Supero SMT IPMI Specifications

General

Brand	Supero
Model	SMT IPMI
Category	Controller
Language	English