Supero SMT IPMI - Configuring the Radius Settings

Chapter 2: Conguring BMC/IPMI Settings
2-23
2.8.5ConguringtheRadiusSettings
This feature allows the user to congure Radius Option settings. When you click
<Radius>in the Options Window, the following screen will display.
1. Check the <Enable> box to enable Radius support. Enter the information in
the elds below to congure Radius settings.
2. Enter the port number for the Radius server.
3. Enter the IP address of the Radius server.
4. Enter a (secret) password for the user to access the Radius server
After entering the information in the elds, click <Save> to save the information
you've entered.
1
2
3
4