Supero SMT IPMI - 2.11 Maintenance

Chapter 2: Conguring BMC/IPMI Settings
2-65
2.11 Maintenance
Use this feature to manage and congure IPMI device settings.
Click the <Maintenance> icon in the menu bar to invoke the Maintenance main
screen as shown above. The Maintenance menu includes the following items.
•Firmware Update: Click this item to update the remote server's BMC rmware.
The Firmware Update screen is shown in the next section.
•Unit Reset: Click this item to reboot the BMC (IPMI) controller.
•IKVM Reset: Click this item to reset the IKVM setting.
•Factory Default: Click this item to restore IPMI to the factory default settings.
•IPMIConguration: Click this item to save IPMI conguration settings to a le
or to load IPMI conguration settings from a le.