Supero SMT IPMI User Manual

Chapter 2: Conguring BMC/IPMI Settings
2-19
2.8.2ConguringDateandTimeSettings
This feature allows the user to congure the time and date settings for the host
server and the client computer. When you click the <Time and Date> icon in the
Options window, the following screen will display.
The user can either set the date & time setting manually or use the NTP Server
setting to set date & time. Follow the instructions below to set Date/Time settings.
Note: Time zone is enabled when NTP is selected. The options are UTC
-12:00 hr. ~ +12:00 hr.
1. Click Date/Time on the left to set the date/time settings.
2. Select the time zone.
3. Check this item for NTP settings.
4. Enter the IP address for the primary NTP server.
5. Enter the IP address for the secondary NTP server.
6. Enter the date.
7. Enter the time in hh/mm/ss format.
Click Refresh to change the date/time settings.
Click Save to save the entries.
1
2
3
4
5
6
7

Supero SMT IPMI Specifications

General

Brand	Supero
Model	SMT IPMI
Category	Controller
Language	English