Supero SMT IPMI - Configuring Light-Weight Directory Access Protocol (LDAP) Settings

2-20
SMT IPMI User's Guide
2.8.3ConguringLight-WeightDirectoryAccessProtocol
(LDAP) Settings
This feature allows the user to congure the Light-Weight Directory Access Proto-
col (LDAP) settings. When you click <LDAP> in the Options window, the following
screen will display.
Follow the steps below to congure the LDAP settings.
1. Check the enable box to enable LDAP Authentication and LDAP Authentica-
tion over SSL support.
2. Enter a port number for the LDAP server.
3. Enter an IP Address for the LDAP server.
4. Enter a Bind Password for the LDAP server.
5. Enter a Bind DN value in the eld. (The bind DN is the user or the LDAP
server that is permitted to do search in the LDAP directory within a dened
search base.)
6. Enter a SearchBase value in the eld. (The SearchBase is the directory that
allows the external user to search data.)
7. After entering the information in the elds, click <Save> to save the informa-
tion you've entered.
1
2
3
4
5
6
7