2-34
SMT IPMI User's Guide
Modifying IP Access Rules
When you select an item and click <Modify>, the Add Rule submenu will display
as shown below.
To modify a rule, enter the information needed for the following items:
•IP Address/Mask: This item allows you to grant access to a specic IP address or
a range of IP addresses. For example, if you wanted to specify a range of IP ad-
dresses from 192.168.0.1 to 192.168.0.126, you would enter 192.168.0.1/25.
•Policy: Select Accept to allow access for the IP address(es) entered above.
Select Drop to deny access.
To Next Page
Loading...