Chapter 2: Conguring BMC/IPMI Settings
2-47
To congure Video Input settings, follow the instructions below.
1. Click <Preference> to invoke the Options submenu.
2. From the Options submenu, click <Input> to invoke the Input page to cong-
ure mouse and keyboard settings.
3. Check <Enable Mouse Input> to enable mouse support so that you can use
the mouse as an input device. Once mouse support is enabled, set a proper
mode for your console redirection.
•Select Absolute Mode if you have the Windows OS
•Select Relative Mouse for the Linux OS.
4. Select Enable Keyboard Input to enable keyboard support so that you can
use soft keyboard as an input device. From the Keyboard layout pull-down
menu, select the right language setting for your soft keyboard.
5. Use the slider on the Repeat Key Timeout scale to select the appropriate
timeout settings for repeat keystrokes from 0ms to 1000ms (micro-second).
6. Click <Save> to save the keyboard setting or click <Cancel> to cancel it.
2.9.1.5.3. Console Redirection - Options: Preference (-Input)
This feature allows you to congure Video Recording input settings for your console
redirection. Click <Input> in the menu bar to activate the Input submenu.
1
2
3
4
5
6
To Next Page
Loading...
Need help?
General