IntelliShot & FlexoShot: Operations Manual Page 20
Bag Selection (or Bag Type) and Tank Selection
For optimum dispense accuracy, the product dispensed should match the product selected in the
software. Dispensers using dairy bags should select the correct product and bag type (e.g., Cream
Cor W). Dispensers using product tanks should select the correct product (e.g., Cream 3.0G).
1. Press and hold the program mode button () until Recipe or Target Adjust is visible in the
display.
2. Press the program mode button () repeatedly until Bag Selection (prefilled dairy bag) or
Tank Selection (refillable product tank) is visible in the display.
3. If using a multi-product dispenser, press a product button (e.g., cream).
4. Press the star button (
) or hexagon button () to scroll through the available product types
until the description matches the product and bag type or product (refillable tank) in the
dispenser.
5. Press and hold the program mode button () to save and exit program mode.
User Options (or Options)
Additional software features for customization are available in the User Options menu. For further
instructions refer to the User Options section in this manual.
Drink Counts
If the Drink Counts feature is available, the dispenser’s software will save the number of dispenses
by product.
1. Press and hold the program mode button (
) until Recipe or Target Adjust is visible in
the display.
2. Press the program mode button (
) repeatedly until Drink Counts is visible in the display.
3. For a one product dispenser, the drink counts will be visible in the display. For a multi-product
dispenser, press a product button to view the total number of drink counts.
4. To reset to zero, press the triangle button (▲) or refill/reset button.
5. Press and hold the program mode button (
) to return to normal operating mode.
Refrigeration
Use the Refrigeration feature to adjust the temperature of the product compartment. The
temperature can also be adjusted using the side console. For further instructions, refer to the
Temperature Display and Adjustment section in this manual.
Service
Service features are typically used by a service technician. In some circumstances, a technician from
the SureShot Technical Assistance Centre may walk a user through a Service feature.
To Next Page
Loading...
Need help?
General
