IntelliShot & FlexoShot: Operations Manual Page 4
RECEIVING THE DISPENSER
INSPECT FOR DAMAGE
Do not accept shipment if damage is extensive. Always note damage in detail with the carrier
whether shipment is accepted or refused as proof for damage claims.
If damage is found after accepting shipment:
1. Immediately contact A.C. Dispensing Equipment Inc. at 888 777-9990 or +1 902 865 9602 for a
Return Material Authorization (RMA) number. No returns will be accepted without prior
approval.
2. A.C. Dispensing Equipment Inc. will contact the shipping company to retrieve and return the
damaged goods to our facility.
3. Hold damaged goods with the carton and packing materials until the shipping company
returns to inspect and pick up the damaged goods.
If shipment has been sent using the customer’s preferred carrier and charged on the customer’s
account, the customer is responsible for all damages that may occur during shipment and are
not covered by the warranty.
REGISTERING THE DISPENSER’S WARRANTY
The dispenser’s warranty must be registered within 60 days of purchase.
Register online
Register by phone
Before registering the warranty, note the dispenser’s model, part and serial numbers located on the
product identification label. This information is required to register the product warranty. For more
information, refer to the Service and Warranty section in this manual.
To Next Page
Loading...
Need help?
General
