IntelliShot & FlexoShot: Operations Manual Page 21
USER OPTIONS
Additional software features for customization are available in the user options menu. Depending on
the model, user options features may be accessed by pressing hidden buttons on the button panel
while in program mode.
Display Temperature Units
The Temp Units feature will add the current temperature of the product compartment in the display
during normal operating mode. Temperature display units are available in either celcius or
fahrenheit. The default setting is typically off (i.e., none). Follow the instructions to select Metric
(Celsius), Imperial (Fahrenheit), or turn the feature off.
1. Press and hold the program mode button (
) until Recipe or Target Adjust is visible in the
display.
2. Press the program mode button () repeatedly until Options or User Options is visible in
the display.
3. Press the first button from the left, top row. Temp Units will be visible in the display.
4. Press and hold the first button from the left, top row to display the temperature in Celsius.
Press and hold the button again to display the temperature in Fahrenheit. Press and hold the
button again to turn off this feature (none).
5. Press and hold the program mode button () to save and return to normal operating mode.
Display Units
The unit of measurement visible in the display is available in either litres or gallons. The default
setting is typically gallons. Follow the instructions to select litres or gallons.
1. Press and hold the program mode button (
) until Recipe or Target Adjust is visible in
the display.
2. Press the program mode button (
) repeatedly until Options or User Options is visible in
the display.
3. Press the second button from the left, top row. The current unit of measurement will be visible
in the display (e.g., Disp Units G).
Figure 29: Button panel for the AC110
To Next Page
Loading...
Need help?
General
