DISASSEMBLY AND ASSEMBLY 4-3
NOTE:
When removing the fuel tank, do not leave the fuel hose 7 on
the fuel tank side.
• Remove the fuel tank assembly.
• Loosen the muffler connector clamp bolt 8.
• Remove the muffler 0 by removing their bolts 9.
• Remove the exhaust pipe B by removing their nuts A.
• Remove the exhaust pipe gasket C.
NOTICE
Dirt and dust in the fuel supply line can damage the
motorcycle.
* Put the plug and cap to the fuel hose and fuel pump
when the fuel pump connector is disconnected.
* Be sure to keep the parts clean when disconnecting
and connecting the connector.
NOTICE
When disconnecting the fuel hose 7, using a tool can
cause damage to the fuel hose.
Disconnect the fuel hose 7 by hand.
To Next Page
Loading...
